Support

TD-27 System Program ( Ver.1.02 )


HOW TO TELL THE VERSION
Please check the version of the system working on your TD-27 before downloading the archive file.
  1. Press the [ SYSTEM ] button.
    The SYSTEM MENU will appear.
  2. Use the cursor buttons to move the cursor to [ INFO ] icon, then press the [ ENTER ] button.
    The PROGRAM INFORMATION screen appears.

* If information other than Program Version is displayed, press the [ F1 ] (PROGRAM) button.
* Don't perform the update if the product is already up-to-date.

VERSION HISTORY
[ Ver.1.02 ] JAN 2020
  • VAD503/506 series' trigger parameters are now supported.
  • A problem with the SOFT THRU USB MIDI IN was fixed.
  • Minor bugs have been fixed.

ITEMS TO PREPARE FOR THE UPDATE/DATA BACKUP
Following items are required to perform the update and data backup.
  • TD-27 itself
  • PC to write the updater to the SD Card
  • SD Card formatted on the TD-27

HOW TO DOWNLOAD AND EXPAND THE ARCHIVE FILE
Download the file named "td27_sys_v102.zip."
The downloaded file is an archive file in zip format. Right-click to select Extract All, and then follow the instructions.
After expanding the file, the folder "td27_sys_v102" holding the file "TD27_UPA.BIN" will appear.

CAUTIONS WITH THE UPDATE
  • Never apply this update data to any product other than the TD-27. This update data may destroy the data or system program of other products.
  • Never power-off your TD-27 while the update is in progress!
    If a power failure or similar accident occurs during the update process, the TD-27 won't be able to start up in normal operating mode.
    This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

HOW TO UPDATE
Please install the system program "TD27_UPA.BIN" to the TD-27 by following the process below.
  1. Copy the update-use file ( TD27_UPA.BIN ) to the root directory of the SD Card.
  2. Make sure the unit's power is switched off, then insert the SD Card to the SD CARD slot.
  3. While holding down the [REC] button, turn on the power.
  4. When the message "=== update ===" appears, release the button.
    The update starts.
    * It will take about 5 minutes to update. Be sure never to switch off the power before the operation finishes.
  5. When the message "update finished." is displayed, the operation has finished.
  6. Turn off the power.
  7. Detach the SD Card, then switch on the power of the unit and verify that the version has been updated.

Support

Quick Links