Support

RT-MicS Wave Sender Ver.1.00 for Windows


For information on RT-MicS Wave Sender, refer to "RT-MicS Quick Start (Movie)."
DOWN
For information on RT-MicS Wave Sender, refer to "RT-MicS Quick Start (Movie)."
DOWNLOAD AND EXPAND THE ARCHIVE FILE
Download the file named "rtmics_ws_w100.zip".
It is an archive file in zip format, please double click on the file to expand.

The unarchived rtmics_ws_w100 folder comprises the installer for "RT-MicS Wave Sender for Windows" and the "RT-MicS_Preload" folder, which contains 8 types of sounds included by factory default.

Required items
  • RT-MicS
  • Micro USB cable (Dedicated charging cables cannot be used.)
  • A computer with a USB connector

HOW TO INSTALL
  1. Copy the "rtmics_ws_w100" folder to the drive of your computer.
  2. Double click the setup.exe just downloaded to start installation.
  3. Follow the instructions in the dialogue boxes to proceed.
  4. When the "Installation has been completed." message appears, click [close] to finish.

STARTING THE APPLICATION
  1. Turn on RT-MicS.
  2. Connect RT-MicS and computer with Micro USB cable.
  3. Double click the RT-MicS Wave Sender icon.
For information on how to use RT-MicS Wave Sender, refer to "RT-MicS Quick Start - Using RT-MicS Wave Sender (Movie)."
 
IMPORTABLE WAV FILES
The specifications of WAV files that can be imported into the RT-MicS using RT-MicS Wave Sender are as follows.
Number of User Sample:
8
Sound Length:
10 seconds/Sample
Data Format:
WAV ( 44.1 kHz、 16 / 24 bits )

* The sounds (WAV files) in the RT-MicS cannot be extracted.

SYSTEM REQUIREMENTS
OS
Microsoft(R) Windows(R) 10
Microsoft(R) Windows(R) 8.1
Microsoft(R) Windows(R) 7 SP1

* This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will operate on all such computers. Please be aware that differences in design or conditions of use may produce differences in the processing power of otherwise similar computers.

 
LOAD AND EXPAND THE ARCHIVE FILE
Download the file named "rtmics_ws_w100.zip".
It is an archive file in zip format, please double click on the file to expand.

The unarchived rtmics_ws_w100 folder comprises the installer for "RT-MicS Wave Sender for Windows" and the "RT-MicS_Preload" folder, which contains 8 types of sounds included by factory default.
 
Required items
  • RT-MicS
  • Micro USB cable (Dedicated charging cables cannot be used.)
  • A computer with a USB connector
 
HOW TO INSTALL
  1. Copy the "rtmics_ws_w100" folder to the drive of your computer.
  2. Double click the setup.exe just downloaded to start installation.
  3. Follow the instructions in the dialogue boxes to proceed.
  4. When the "Installation has been completed." message appears, click [close] to finish.
 
STARTING THE APPLICATION
  1. Turn on RT-MicS.
  2. Connect RT-MicS and computer with Micro USB cable.
  3. Double click the RT-MicS Wave Sender icon.
For information on how to use RT-MicS Wave Sender, refer to "RT-MicS Quick Start - Using RT-MicS Wave Sender (Movie)."
 
IMPORTABLE WAV FILES
The specifications of WAV files that can be imported into the RT-MicS using RT-MicS Wave Sender are as follows.
Number of User Sample:
8
Sound Length:
10 seconds/Sample
Data Format:
WAV ( 44.1 kHz、 16 / 24 bits )

* The sounds (WAV files) in the RT-MicS cannot be extracted.
 
SYSTEM REQUIREMENTS
OS
Microsoft(R) Windows(R) 10
Microsoft(R) Windows(R) 8.1
Microsoft(R) Windows(R) 7 SP1

* This software has been found to work on typical computers that meet the above requirements, but we do not guarantee that it will operate on all such computers. Please be aware that differences in design or conditions of use may produce differences in the processing power of otherwise similar computers.
 

Support

Quick Links