Support

JUNO-X System Program ( Ver.1.10 )


HOW TO TELL THE VERSION
Please check the version of the system working on your JUNO-X before downloading the archive file.
  1. Turn on the power to the unit.
  2. Press [ MENU ].
    The "MENU" screen is displayed.
  3. Use the [ SELECT ] knob to select "INFORMATION" and press [ ENTER ].
    The version information appears.

UPDATE HISTORY
[ Ver.1.10 ] APR 2022
Additional Functions
  • Model Expansions from Roland Cloud are now supported.
    The following Model Expansions can be purchased and installed via Roland Cloud Manager.
    JUPITER-8?JX-8P?SH-101?JD-800?VocalDesigner
    For details, please refer to the respective Model Expansion User's Guide.
  • The Roland Cloud Connect WC-1 (optionally available) is now supported.
    Using the Roland Cloud Connect WC-1, you can freely install via a Wi-Fi connection a wide range of sound content in addition to the Model Expansions just described, depending on the membership license.
    Please refer to the "Roland Cloud Connect Setup Manual" for detailed information in the [ Owner's Manuals ].
  • JUNO-X Editor is now supported. You can install this for use on your computer via Roland Cloud Manager.
    Please refer to the "JUNO-X Editor Owner's Manual" for detailed information in the [ Owner's Manuals ].
  • Profiles that can be used with Apple MainStage and the JUNO-X in tandem are now supported.
    Please refer to the "JUNO-X MainStage Profile Usage Guide" for detailed information in the [ Owner's Manuals ].
Bug Fixes
The following bugs have been fixed.
  • Minor bugs.

WHAT YOU WILL NEED TO UPDATE YOUR JUNO-X
  • JUNO-X
  • USB Memory
    * The USB Memory need to be formatted on a JUNO-X.

CAUTION WHEN PERFORMING THE UPDATE
  • Never apply this update data to any product other than the JUNO-X. This update data may destroy the data or system program of other products.
  • Never power-off your JUNO-X while the update is in progress!
    If a power failure or similar accident occurs during the update process, the JUNO-X won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
  • We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

GETTING THE UPDATE FILE
Please open/extract the downloaded "junox_sys_v110.zip" file on your computer to get the "junox_sys_v110" folder.
Please make sure you have unzipped the downloaded update file.

PROCEDURE FOR THE UPDATE
Creating the Update USB Memory
  1. Copy the update file JUNOX_UPA_up.bin to the root directory of a USB Memory.
Update Procedure
  1. Connect the USB memory device to the USB MEMORY connector and hold down [ MENU ] and turn on the power to the unit.
    "JUNO-X Updater..." appears on the screen and the update starts automatically.
    * Never turn off the power or detach the USB memory device while the update is in progress. Doing so might make the unit impossible to start.
  2. When "Please power off" is displayed, the updating has finished.
  3. Turn off the power to the unit and detach the USB memory device.
  4. This completes the update operation. The new system program runs at the next startup.
    Follow the procedure for verifying the version to verify that the version has been updated.

Support

Quick Links