Roland India - Support - F107 - Updates & Drivers - RP701 / F701 / RP107 / F107 System Program (Ver.1.07)

RP701 / F701 / RP107 / F107 System Program (Ver.1.07)

HOW TO KNOW THE VERSION
Before you start, check the system program version of your RP701 / F701 / RP107 / F107.
* RP701 / F701 and RP107 / F107 have different procedures of checking versions.

RP701 / F701

Press the [] (settings) button.
Turn the [] ( select/confirm ) knob to select "Version."
Press the [] ( select/confirm ) knob.
The version information is displayed.
If this shows the latest version (version 1.06 or later), there's no need to update.
Press the [] (settings) button.

RP107 / F107

Hold down [] (Volume + ) and switch on the power to the unit.
* Continue to hold down the power button until the topmost indicator to the right of the volume buttons flashes.
Examine the pattern of lighted and dark indicators to determine the current version.
If the indicators are not lighted and dark as described below, perform an update.
* If the pattern of lighted and dark is as follows, the system is at the latest version. No update operation is necessary.
- 1st from top (topmost) : Flashing
- 2nd from top : Lighted
- 3rd from top : Dark
- 4th from top : Dark
- 5th from top : Dark
After verifying the displayed version, switch off the power.

UPDATE HISTORY
[ Ver.1.07 ] SEP 2022

The version number has been updated due to management-related circumstances.
Product specifications are unaffected.

[ Ver.1.06 ] JUL 2022

Specification changes

Changed the display name when connected to PC via USB.

Bug Fix
The following bug was fixed.

Some units have [] ( select/confirm ) knob that do not operate properly.

[ Ver.1.03 ] DEC 2020

Bug Fix
The following bug was fixed.

In the Piano Every Day app (iOS and Android), performances in "One Week Master" cannot be recorded.

WHAT YOU WILL NEED TO UPDATE YOUR RP701 / F701 / RP107 / F107

RP701 / F701 / RP107 / F107
USB Memory
* The USB Memory need to be formatted on a RP701 / F701 or PC.
A computer with a USB connector ( Windows, Mac )
Update file downloaded from this page

CAUTIONS WITH THE UPDATE

Never power-off your while the update is in progress!
If a power failure or similar accident occurs during the update process, the won't be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.
RP701 / F701 has the ability to save your user data to a USB memory. If a problem occurs and your user data is lost, you will be able to restore the original state by reloading the data you saved. For details on the procedure, refer to the following sections of the Owner's Manual.
- Initializing the Memory (Format Media)
  * This formats the USB memory device.
- Saving Piano Settings (Piano Setup Export)
- Loading Piano Settings (Piano Setup Import)
- Recording Your Keyboard Performance - Copying a recorded song
* Please be aware that "Ambience Type" is not saved to the USB memory device.

GETTING THE UPDATE FILE

Download the file named "rp701_f701_sys_v107.zip".
The downloaded file is an archive file in zip format. Right-click to select Extract All, and then follow the instructions. After expanding the file, the folder "rp701_f701_sys_v107" holding the file "R079_UPA.BIN" will be appeared.

PROCEDURE FOR THE UPDATE

Creating the Update USB Memory

Copy update files R079_UPA.BIN to the root directory of a USB Memory.

Update Procedure
* The RP701 / F701 and RP107 / F107 have different update procedures.

RP701 / F701

Make sure the unit's power is switched off, then connect the USB memory into the USB MEMORY port.
Hold down [] (settings) button and switch on the power to the unit.
Continue to hold down the [] (settings) button until " ===update=== " appears on the display.
When the message " = update finished. = " appears, the update operation has finished.
* The update operation takes about 2 minutes.
Press and hold the power button to turn off the power.
Detach the USB Memory from the digital piano.

This completes the update operation. The new system program runs at the next startup.

RP107 / F107

Turn off the power to the RP107 / F107 and connect the USB memory device to the unit's USB Memory port.
Hold down [] (settings) button and turn on the power to the digital piano.
The update starts. While the update is in progress, the indicators to the right of the volume buttons repeatedly flash and go dark in order from the bottom.
* The update operation takes about 2 minutes.
* Never switch off the power or detach the USB memory device while the update is in progress.
When the indicators to the right of the volume buttons all flash simultaneously, the update is complete.
Turn off the power to the RP107 /F107.
Detach the USB memory from the RP107 /F107.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

RP701 / F701 / RP107 / F107 System Program (Ver.1.07)

Support

Quick Links