Roland India - Support - DJ-202 - Updates & Drivers - DJ-202 System Program (Ver.1.04)

DJ-202 System Program (Ver.1.04)

How to know the version
Before you start, check the system program version of your DJ-202.

While holding down the [rotary selector] in the Browser Section, connect the DJ-202 and the computer and turn on the power.
The illumination pattern of the Performance pads in the Deck Section and the buttons in the Mixer Section indicates the current version.
If these items are lighted as shown in the figure below, the unit is at the latest version. If the illumination pattern of the buttons is different from the figure, update the unit.
After checking version of the product, power off the DJ-202 without performing any button operation.

Update history
[ Ver.1.04 ] OCT 2017
Bug Fix
The following bug was fixed.

Minor bugs have been fixed.

[ Ver.1.03 ] OCT 2017
Bug Fix
The following bug was fixed.

VINYL for DECK 3 and 4 cannot be turned off via operation from Serato Intro.

What you will need to update your DJ-202

DJ-202
USB cable included with the DJ-202
A computer with a USB connector ( Windows, Mac )

Caution when performing the update

Never apply this update data to any product other than the DJ-202. This update data may destroy the data or system program of other products.
Never power-off your DJ-202 while the update is in progress!
If a power failure or similar accident occurs during the update process, the DJ-202 won’t be able to start up in normal operating mode. This will require servicing, so you will need to contact Roland service center near you if this occurs.
We regret that we are unable to answer questions regarding the update procedure using this system program. Please perform the update responsibly, following the directions given in this document.

Getting the update file

Please open/extract the downloaded "dj202505_sys_104.zip" file on your computer to get the update file in the "dj202505_sys_104" folder.

Procedure for the update
Caution

You must not rename the extracted file.
Never turn off the DJ-202's power while the update is in progress. Otherwise the system program or the DJ-202 itself may be destroyed.

Please install the extracted system program file into your DJ-202 according to the following procedure.

While holding down the [SYNC] button in the mixer section, connect the DJ-202 and the computer using the USB cable and turn on the power.
Open the "Roland" drive folder in your personal computer.
Copy DJ202-505_C0A_up.bin in the "dj202505_sys_104" folder into the "Roland" drive by dragging and dropping it.
* Do not copy the "dj202505_sys_104" folder.
Pressing the [SYNC] button in the mixer section starts the update.
The performance pads flash while the update is in progress.
When the performance pads stay lighted, the update is complete.
Detach the USB cable and turn off the power.
* The performance pads might flash at the first startup after the update. This is not a malfunction; without turning off the power, wait for the unit to start up.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

DJ-202 System Program (Ver.1.04)

Support

Quick Links