Roland India - Support - BRIDGE CAST ONE - Updates & Drivers

BRIDGE CAST App Ver.4.00 for Windows

A connection issue was found on BRIDGE CAST App Ver.4.00 with BRIDGE CAST X Ver.1.02.

If your BRIDGE CAST X version is Ver.1.03 or later, BRIDGE CAST APP Ver.4.00 is available.
If you are using BRIDGE CAST X Ver.1.02, please install BRIDGE CAST App Ver.3.03 and update your BRIDGE CAST X system program to Ver.1.07 to use BRIDGE CAST App Ver.4.00.
The USB II on the back panel of BRIDGE CAST X needs to be “MOBILE” setting before connecting your computer.

BRIDGE CAST App Ver.3.03 for Windows

UPDATE HISTORY

[ Ver.4.00 ] SEP 2024

Functionality Improvements

Supports BRIDGE CAST ONE
Supports 5.1 / 7.1 virtual surround via USB
Supports 5.1 / 7.1 virtual surround sound using two speakers
Added Game LIBRARY function
Added Game LIMITER function
Added SUB MIX function (microphone audio without effects can be output separately via USB)
Added ATTACK and RELEASE to NOISE SUPPRESSOR
Added HOT KEY to MUTE/ASSIGN function (BRIDGE CAST)

* Prior to FIRMWARE Ver. 1.07, the device name displayed as "GAME (BRIDGE CAST(X))" on the PC will be changed to "Speakers (BRIDGE CAST (X) V2)" for some applications (Windows only).

* BRIDGE CAST / BRIDGE CAST X requires a new USB driver (V2) to be installed. The new USB driver can be installed from the "BRIDGE CAST App".

[Ver.3.03] APR 2024

Bug Fixes

Fixed a bug that USB OUT MODE is reflected even when the USB connection setting is PC.(BRIDGE CAST)
To address the above, you need to update BRIDGE CAST system program to Ver.1.07. See "PROCEDURE FOR UPDATING SYSTEM PROGRAM" below.

Functionality Improvements

If [VIDEO] USB OUT was ON at the last startup, [VIDEO] USB OUT is automatically ON when a video signal that can be output from USB is input to HDMI IN.(BRIDGE CAST X)
[VIDEO] USB OUT remains ON even if the HDMI cable is unplugged.(BRIDGE CAST X)
To address the above, you need to update BRIDGE CAST X system program to Ver.1.07. See "PROCEDURE FOR UPDATING SYSTEM PROGRAM" below.

[Ver.3.02] MAR 2024

Bug Fixes

Fixed an issue that sometimes interrupted HDMI THRU.(BRIDGE CAST X)
Fixed an issue that USB OUT MODE was not reflected at startup.(BRIDGE CAST X)
Fixed an issue that could cause SFX writes to fail.(BRIDGE CAST X)
Fixed an issue that prevented some Mac models from sleeping.(BRIDGE CAST X)
To address the above issue, you need to update BRIDGE CAST X system program to Ver.1.06. See "PROCEDURE FOR UPDATING SYSTEM PROGRAM" below.

[Ver.3.01] FEB 2024

Bug Fixes

Fixed an issue with the microphone in some headsets.(BRIDGE CAST X)
To address the above issue, you need to update BRIDGE CAST X system program to Ver.1.04. See "PROCEDURE FOR UPDATING SYSTEM PROGRAM" below.

[Ver.3.00] JAN 2024

Additional Function

BRIDGE CAST X Support
Added PLAY LIST Function to BGM CAST

[Ver.2.01] DEC 2023

Bug Fixes

Minor bug fixes

[Ver.2.00] JUL 2023

Additional Function

Added BGM CAST
Added New "HOME" screen with integrated "LEVEL METER" screen and "CHANNEL" tab.
Added Color Indicator setting when MUTE ON ("SYSTEM" tab > MUTE DISPLAY)
To use these function, you need to update the system program to Ver.1.06. See "PROCEDURE FOR UPDATING SYSTEM PROGRAM" below.

[Ver.1.02] APR 2023

Additional Function

Added VOICE CHANGER MODE
To use the function, you need to update the system program to Ver.1.05. See "PROCEDURE FOR UPDATING SYSTEM PROGRAM" below.

[Ver.1.01] JAN 2023

Additional Function

Added a panel diagram of BRIDGE CAST that displays the target area in the menu tab
Roland Cloud BGM support preview display

Bug Fixes

Fixed a malfunction when linking the MIC volume slider on the level meter screen.

DOWNLOADING AND UNARCHIVING THE COMPRESSED FILE

Read the software license agreement at the bottom of the screen and select the “I agree” check box.
Click the “Download” button to download the BRIDGE CAST App (bridgecast_app_w400.zip).
Right-click the file and select “Extract All,” then click "Extract".
“bridgecast_app_w400” folder appears.

HOW TO INSTALL

Open the “bridgecast_app_w400” folder.
Double-click “Roland_BRIDGE_CAST_Installer.exe”.
The installer starts.
Follow the on-screen instructions to install.

PROCEDURE FOR UPDATING SYSTEM PROGRAM

Use the BRIDGE CAST App software to update the BRIDGE CAST, BRIDGE CAST X and BRIDGE CAST ONE hardware's system program.
When you connect a BRIDGE CAST / BRIDGE CAST X / BRIDGE CAST ONE with an older version to your computer, the update screen pops up.

Follow the steps below to update.

Connect the BRIDGE CAST or BRIDGE CAST X(USB II port) or BRIDGE CAST ONE to a computer with the included USB cable.
From the computer's "Start" menu, select "Roland BRIDGE CAST" -> "BRIDGE CAST."
*When updating BRIDGE CAST X, make sure to use the computer that's connected to the USB II port.
If the message “Version mismatch” appears, click the “UPDATE”.
When the confirmation screen for updating the version appears, click “OK”.
The update starts.
-Never disconnect the USB cable while the update is in progress.
-It takes approximately 2 minutes.
After the update is complete, follow the indications on the App screen.
-The update process may continue. In this case, the MIC EFFECTS [ON] button flashes to start the update. (The VIDEO [HDMI IN] button may blink on BRIDGE CAST X.) When the update is complete, it will start as it is.

SYSTEM REQUIREMENTS

OPERATING SYSTEM

Microsoft(R) Windows(R) 10 or later

*Operation of this app on a standard computer that satisfies the conditions just described has been confirmed, but all operation under these conditions is not assured. Please be aware that even under identical conditions, computer-specific differences in design specifications or usage environment might result in differences in processing capacity.
*Microsoft and Windows are registered trademarks of Microsoft Corporation.
*All product names mentioned in this document are trademarks or registered trademarks of their respective owners.
*The contents of the files are subject to change without notice for improvement of the program.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

BRIDGE CAST App Ver.4.00 for Windows

Support

Quick Links