Roland India - Support - - Updates & Drivers - AIRA Modular Customizer Ver.1.50 for Windows

AIRA Modular Customizer Ver.1.50 for Windows

AIRA Modular Customizer is dedicated software for customizing BITRAZER, DEMORA, TORCIDO, and SCOOPER.

Update history
[ Ver.1.50 ]

Additional Function

Sixteen types of sub-modules have been added.
* For detailed information on the sub-modules, refer to the Manual ( PDF format ).

SHORT DELAY
TUBE CLIP
COMPRESSOR
NOISE GATE
3 BAND EQ
LOGIC OPERATION
CROSS FADER
SWITCHER
ENVELOPER
TRIGGER TO LFO RATE CV
FILTER 18dB
FILTER 24dB
FORMANT FILTER
SAW OSCILLATOR
SQR OSCILLATOR
MIDI NOTE TO CV/GATE

Download and Expand the Archive File

Download the file named "AIRA_Modular_w150.zip".
It is an archive file in zip format, please double click on the file to expand. After expanding the file, "AIRA_Modular_w150" folder will be appeared.

How to Install

Copy the "AIRA_Modular_w150" folder to the drive of your computer.
In the "AIRA_Modular_w150" folder, double-click "AIRA Modular Customizer Installer.exe".

Starting the Application

Double-click the AIRA MODULAR CUSTOMIZER icon on the desktop.

Manual Startup

For detailed information about the AIRA Modular Customizer, after startup, click [ System Menu ], then AIRA Modular Customizer, and view the manual ( in PDF format ).

System Requirements

Operating System

Microsoft(R) Windows(R) 10 ( 64-bit version / 32-bit version )
Microsoft(R) Windows(R) 8 / 8.1 ( 64-bit version / 32-bit version )
Microsoft(R) Windows(R) 7 Service Pack 1 or later ( 64-bit version / 32-bit version )
* This app cannot be used in a virtual Window environment such as Windows XP Mode (Virtual Windows XP), Hyper-V, or Virtual PC.
* Mac computers running Windows are not supported.

Resolution

1,920 x 1,080 pixels or higher

Required hardware

USB port or sound card

Required software

Internet Explorer 10 or later

* Although Roland has tested numerous configurations, and has determined that on average, a computer system similar to that described above will permit normal operation of the AIRA Modular Customizer, Roland cannot guarantee that a given computer can be used satisfactorily with the AIRA Modular Customizer based solely on the fact that it meets the above requirements. This is because there are too many other variables that may influence the processing environment, including differences in motherboard design and the particular combination of other devices involved.

* Microsoft, Windows are registered trademarks of Microsoft Corporation.
* All products names mentioned in this document are trademarks or registered trademarks of their respective owners.

Roland Software License Agreement

In no event shall Roland Corporation be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this updater. The foregoing provision is effective even if Roland Corporation has been advised of the possibility of such damages.

This is a legal agreement between you (an individual or a corporation) and Roland Corporation (herein referred to as "Roland") regarding the usage of this software product (herein referred to as "SOFTWARE"). Please read carefully the terms of this License Agreement before installing or using the SOFTWARE. By installing, copying, or starting the use of the SOFTWARE, you hereby consent to the terms of this License Agreement.

1. GRANT OF LICENSE

Roland grants you the following non-exclusive rights to use the SOFTWARE in accordance with the terms of this License Agreement.
(a) You may only use the SOFTWARE on a specific single computer at one time. Use of the SOFTWARE shall include loading the SOFTWARE into temporary memory (i.e., RAM) or installing the SOFTWARE into storage media (i.e., hard disk) of the computer on which you will use the SOFTWARE.
(b) You may make one copy of the SOFTWARE for backup purposes only (on floppy disk, magneto optical disk, DAT or the similar media), but you are prohibited to make any other copy.

2. COPYRIGHT

The SOFTWARE and its copyrights are the property of Roland and are protected by all international copyright laws and treaties.
Therefore, you must treat the SOFTWARE like any other copyrighted material (i.e., a book or a CD). All rights that are not provided for herein are reserved by Roland.

3. OTHER RESTRICTIONS

(a) You shall not modify, change, reverse engineer, decompile, or disassemble the SOFTWARE and the copyright notice and copyrighted logo.
Unauthorized copying, uploading to another network, distributing, modifying and/or attaching this software to other media or any other sales item is expressly forbidden.
(b) You shall not loan, rent, lease, sublicense or transfer the SOFTWARE, either in whole or in part, to any third party. But you may permanently transfer the SOFTWARE and accompanying printed materials provided you retain no copies of the Software and recipient agrees to the terms of this License Agreement. If the SOFTWARE has been updated or upgraded, any transfer of the SOFTWARE must include the most recent update and all prior versions.
(c) If this SOFTWARE contains multiple templates of media (such as floppy disks and CD-ROM) and these media contain the same software, you may use only the one form of media that is appropriate for your computer. You shall not use the remaining form(s) of media on another computer.
(d) You may not use the Software from multiple locations of a multi-user or networked system at any time.

3.2 Open source software and other third party software
(a) The SOFTWARE may use open source software and other third party software (herein referred to as "OSS, etc.").
(b) The OSS, etc. in the case of the preceding paragraph shall be subject to the OSS, etc. license (herein referred to as "OSS License"), and you shall comply with the OSS License.
(c) If there are any differences between the terms of this License Agreement and the OSS License, the OSS License shall prevail and the terms of this License Agreement shall not apply.

4. NO WARRANTY

Roland makes no warranty, either expressed or implied, with respect to any of the software, including, without limitation, any implied warranties of merchantability or fitness for a particular purpose.

5. NO LIABILITY

Roland can not reply to inquiries regarding this system software updater. Please read the instructions completely, and please note that you should use the SOFTWARE AT YOUR OWN RISK.
In no event shall Roland be liable to end-users for any damages whatsoever, including but not limited to financial damages for any loss of profits or information arising from the use of, or inability to use this product. The foregoing provision is effective even if Roland has been advised of the possibility of such damages. Even if the SOFTWARE has any material, verifiable, and reproducible program errors, Roland shall have no liability to modify such errors.

6. TERMINATION OF THE LICENSE

Roland reserves the right to terminate this License Agreement if you fail to comply with any of the terms of this License Agreement. Upon such termination, you shall immediately stop using the SOFTWARE.

7. GENERAL

(a) Any provision of this Agreement which is prohibited or unenforceable in any jurisdiction shall be ineffective to the extent of such prohibition or unenforceability without affecting, impairing or invalidating the remaining provisions hereof.
(b) This License Agreement shall be governed by and construed in accordance with the laws of State of California without reference to the principles of conflicts of laws.

AIRA Modular Customizer Ver.1.50 for Windows

Support

Quick Links